Arbor Systems

An Arbor Systems Partner

For pesticide & fertilizer applications under the soil service

Soil Injector Urban foresters, arborists and tree care professionals now have an easily transportable way for tree and shrub pesticide and fertilizer applications under the soil surface.

The EZ-Ject Soil Injector has a semitransparent container for viewing product usage, adjustable injection depth from two to eight inches and a replaceable hardened steel tip.

EZ-Ject Soil Injector

	LITE	STANDARD
Pumping systems delivers ½ oz. (15 ml) stroke per (¼ oz. (7.5 ml) per stroke option available)
Narrow handle and profile for dense underbrush
Adjustable foot plate and probe depth control
One-gallon chemical tank
Wide-mouth screw cap for filling
Adjustable handles for applicator height
Wide handle configuration
Quick interchange containers with zero leakage
Replaceable one-gallon container
Fill stand to help replenish containers
Stainless steel cage for container protection
Garden hose adapter for easy cleaning

EZ-Ject Herbicide System

Foresters, utility managers, and agricultural producers now have an efficient, effective, economical way to kill unwanted trees, stumps, and invasive woody plants.

With one simple movement, the spring-loaded EZ-Ject Herbicide Lance injects a a herbicide shell into the base of a tree, stump, or brush and into the cambium layer. The systemic herbicide is absorbed by the tree, effectively killing roots, trunk, and foliage. Dead tree, stump, or vegetation can be removed or left to decompose naturally.

Gravity-fed, spring loaded head injects shells through bark with minimal operator effort.
1 Load up to 400 herbicide shells through the screw-off end cap.

Effectively control unwanted trees

Control trees in many situations

Buffer zones
Roadsides
Watersheds
Drainage areas
woodlots
roadsides
CPC land
Prairies
Utility right-of-ways

Many Diverse Uses

Control non-compatible species
ATV a Thin hardwoods
Manage juvenile spacing
Kill stumps

ATV and behind seat friendly!

The standard EZ-Ject Lance is 63.5″ (161 cm) long and has a capacity of 400 shells, 100 in each of four chambers. Fully loaded, the EZ-Ject Lance weighs less than 10 pounds.

The short EZ-Ject Lance is 41.25″ (104 cm) long and has a capacity of 228 shells, 57 in each of 4 chambers.

The Bull Dog EZ-Ject Lance is 25.25 (64 cm) long & capacity of 100 shells, 25 in each of 4 chambers.

Wedgle Direct-Inject

Tree Injection System

Easy, fast, proven effective, and the only no-drilling trunk injection Method.

The Wedgle Direct-Inject System is the fast, effective, tree-friendly way to treat trees for a broad range of destructive pests, harmful diseases, and nutrient deficiencies including Hemlock Woolly Adelgids, Emerald Ash Borers, psyllids, aphids, Oak Wilt, Dutch Elm Disease, Anthracnose, chlorosis and more.



Wedgle Direct-Inject Injection Unit

Two Quick-Connect (QC) couplers provide super-fast setup.



Preset application rates

The injector is preset to release 1 ml of chemical with each full stroke of the handles. Easily adjusts to deliver .5 ml dose



Easy to use and maintain

Sealed injector will not lose prime while in use. Annual maintenance limited to O-ring replacement.



Quick-Connect Injection Tips

The front QC coupler accepts a variety of injection tips for treating hardwoods, conifers, and palms.



Quick-Connect Chemical Packs

The top QC coupler lets you quickly attach chemical packs to the injector.



Closed System

Virtually eliminates exposure concerns. No mixing, no caplets, no spraying or soil drenching concerns.

With no drilling required, the Wedgle Direct-Inject System:

Minimizes wounding to keep out fungi, bacteria and insects.
Prevents air from getting into the tree. When air is allowed into a tree’s vascular system, it cuts
off the flow of water and nutrients.
Allows multiple treatments without damaging the tree.
Requires no drills, power supply or other bulky equipment.

Deluxe Wedgle Direct-Inject Unit

Everything you need to treat your trees in one convenient case.

The rugged, high-impact plastic carrying case is included at no extra charge with every Wedgle Direct-Inject System purchase. The all-in-one case with custom foam inserts holds the injection unit, all tools, and up to six 120 ml chemical packs. Case without contents also available for those who already own a Wedgle Injection Unit.
Deluxe Kit Includes:

Wedgle Direct-Inject Injection Unit
Six Wedgle Tips: two 1.5” tips, four .75” tips
SpeedChek WedgeChek Punch
40 SpeedCheks
Tip Setter*
Twelve Portle Tips:* five 1.5” tips, five .75” tips, two .5” tips

Three containers for tips and parts storage and tips cleaning
Two water packs for priming
Diameter tape measure
Deflector shield
Garden hose adapter for cleaning
Safety glasses
Cleaning brush

Dont Drill Direct-Inject

Use Direct-Inject System – the only no-drill tree trunk injection method that is easy, fast, proven effective and tree friendly.



Prevent drilling damage

With no drilling needed, the Wedgle Direct-Inject System prevents long-term wounding, protecting tree health and vitality.



Increase effectiveness

The Wedgle Direct-Inject unit injects chemical directly into the cambial zone, right where the tree can use it. You get proven results from less chemical, lowering cost per tree.



Treat almost any tree in 5 minutes or less

No power, drills, or pumps needed. There is no guarding trees, no waiting for uptake. You’ll treat more trees in less time, reducing labor costs and increasing profits.

Direct-Inject protects trees

Inject chemical through bark only without damaging sapwood (chemical in cambial zone dyed red for visibility).
Inject chemical directly through the bark without drilling. No air enters the sapwood, so chemical is readily absorbed.
Vascular system is undisturbed, maintaining nutrient movement.
Chemical is placed in the cambial zone, where it is used most effectively—you’ll see improved results from less chemical.
Multiple or annual treatments can be made without injuring the tree.

Drilling damage

Drilling wounds compartmentalize disrupting nutrient movement
Drilling for injections allows air
into the sapwood, disrupting translocation and reducing chemical effectiveness.
Air entering the vascular system disrupts nutrient movement.
Drilled holes often extend beyond active layers, so chemical is lost in non-active wood where the tree cannot use it.
Drilling wounds cause permanent damage. Repeated drilling can seriously impact tree vitality.

Quick-Connect Injection Tips

Treat more types of trees, more effectively



Wedgle Injection Tips

The Wedgle Tip has a patented wedge-shaped end that delivers chemical to the cambial zone between the bark and outer ring of sapwood (the xylem). The Wedgle Tip is inserted into the tree while attached to the Wedgle Direct-Inject unit and is used with WedgeCheks™ which aresmall plugs that keep the chemical in the tree after the injection is made.



Portle Tips

The Wedgle Tip has a patented wedge-shaped
end that delivers chemical to the cambial zone between the bark and outer ring of sapwood (the xylem). The Wedgle
Tip is inserted into the tree while attached to the Wedgle Direct-Inject unit and is used with WedgeCheks™ which are
small plugs that keep the chemical in the tree after the injection is made



Palm Tip

Palm Tip is longer, heavier tip designed to penetrate a palm’s outer husk and deliver chemical deep into the inner active layers.

The High-Volume Kit

Treat hundreds of trees nonstop

Make up to 1000 injections without reloading chemical. Simply attach the hose to the Wedgle Direct-Inject unit and the 1000 ml chemical pack, prime, and inject. No other tools, equipment, or power supply are needed.

1. Remove the yellow cap from the hose guide by unscrewing. Remove the adaptor sleeve from inside the hose guide.

2. Slide the High-Volume hose through the yellow cap and into the hose guide, pulling the hose through the chemical pack cage and out the top of the backpack.

3. Attach the hose to a 1000 ml chemical pack using the same method as you attach a 120 ml chemical pack to the injection unit (see instruction on page 1).

4. Carefully pull the hose and chemical pack into the cage inside the backpack until the chemical pack rest snugly against the hose guide.

5. Secure the chemical pack in the cage with the closure pin.

6. Place the adaptor sleeve over the hose and slide the sleeve into the hose guide.

7. Screw the yellow cap onto the hose guide and hand tighten.

8. Attach the hose to the top QC coupler on the injection unit.

9. Prime and you are ready to begin injecting.

SpeedCheck Punch

For use with the Arbor Systems Wedgle Direct-Injection system, this upgraded tool holds the new-style WedgleCheck strips, which saves the applicator time by no longer requiring individual WedgeChecks to be ripped off one at a time.

SpeedChek Punch tool uses the WedgeCheks mounted in a long strip similar to a nail gun that uses nails in a strip for easier use and quicker operation.

Directions for use: